How to flashing Realme Narzo 10 RMX2040
Kamis, 11 Juni 2020
Tambah Komentar
How flash Realme Narzo 10 RMX2040 - Realme released a new product to sell in the India market, with sufficient specifications fierce this smartphone is right for you to bring home at competitive prices. The Narzo 10 uses the Mediatek Helio G80 (12 nm) chipset and the Mali-G52 MC2 GPU. for full specifications click here.
After some time of use you might feel this phone is not running optimally for that you have to do the flashing so that the smartphone returns smoothly. The tutorial below will discuss how to flash using an SD Card without a PC.
Flashing is useful for Realme Narzo 10 that experience operating system problems such as getting infected with a virus or malware, hang, restart frequently, bootlop and so forth. If the problem with the phone is still mild, you only need to do a hard reset, please read the how to hard reset the Realme Narzo 10 RMX2040.
How to flash Realme Narzo 10 RMX2040 via a memory card
Prepare the ingredients:
Steps for flashing through recovery mode:
May be useful.
After some time of use you might feel this phone is not running optimally for that you have to do the flashing so that the smartphone returns smoothly. The tutorial below will discuss how to flash using an SD Card without a PC.
Flashing is useful for Realme Narzo 10 that experience operating system problems such as getting infected with a virus or malware, hang, restart frequently, bootlop and so forth. If the problem with the phone is still mild, you only need to do a hard reset, please read the how to hard reset the Realme Narzo 10 RMX2040.
Attention: This flashing process will erase all data in your Realme Narzo 10 internal memory. If possible, move all data such as photos, music, contacts, videos and other important data stored on the phone memory to the memory card or computer. |
How to flash Realme Narzo 10 RMX2040 via a memory card
Prepare the ingredients:
- A minimum of 8 GB of memory card
- Firmware Realme Narzo 10 - Download link
Steps for flashing through recovery mode:
- Download the firmware above
- Move the firmware that you have downloaded, don't extract it, save it on a memory card, put it outside the folder
- Make sure the battery is more than 75% so that it doesn't run out of battery when flashing
- Turn off the cellphone
- Turn on the device while pressing and holding the Power + Volume Down button
- Then select English use the sound (volume) button to move and the power button to choose
- Then you select Install From Storage Device
- Select From SD Card
- Look for the firmware Realme Narzo 10 that was moved to the sd card
- If you have found, tap OK
- Wait for the flashing process to take place
- When you're done go back and tap Reboot
- The phone will restart and return to new
May be useful.
Belum ada Komentar untuk "How to flashing Realme Narzo 10 RMX2040"
Posting Komentar