How flashing Samsung Galaxy A71 5G SM-A7160 via Odin

How flash Samsung Galaxy A71 via Odin - On this page, we are recommended Official Samsung Firmware Flash File Free Download and update Stock Firmware for android. Samsung Galaxy A71 5G SM-A7160 Device.

All smartphones can have problems that arise when it has been used for a long time, or there are user errors such as viruses or malware that cause the phone can not boot (bootlop) which can result in the phone being unable to run optimally so it needs to be flashing.

If possible try to hard reset the Samsung Galaxy A71 SM-A7160, that is the first step before flashing an android. But not all damage on an android device can be repaired this way because every damage is different handling.

Attention: Move data that you consider important like photos, videos, contacts and other data because because the flashing process will erase all data that is on the internal memory of Samsung Galaxy A71

How flash Samsung Galaxy A71


Flash materials:

• Driver Samsung - Visit Site
• Tool OdinV3 - Visit Site
• Firmware Samsung Galaxy A71 SM-A7160  - Visit Site

Flashing steps:

• Make sure you have downloaded the above material
• Extract all downloaded material
• Install Samsung USB driver on your PC, if you have already installed the driver, please skip it.
• Get your phone turned off
• Also make sure the phone battery is more than 75% so that when the flash does not run out of battery
• Turn on your Samsung phone by pressing and holding the Power + Volume down button until the download mode appears on the screen
• After entering the download you next press Volume up once

• Then you connect your smartphone using the original data cable to the computer
• Then open the Odin flash tool
• Look at Odin at the top left in blue which means the driver is connected between the cellphone and laptop.

• In the Odin tool, look for the AP tab and then look for the samung firmware that was extracted earlier.

• If there is a firmaware 4/5 extracted file then enter the BL file for bootoader, AP for AP, CSC for CSC and CP for CP

• Wait a few moments for the firmware to enter Odin, the length of the process depends on the specifications of the PC used
• After the firmware has entered Odin, please press Start below

• Wait for the flashing to run for the duration of the flash depending on the size of the firmware being flashed and the specifications of your computer
• If the flashing is successful a green sign will appear in the top left corner like in the image below with the Samsung Galaxy A71 restart

• Finnish

If this tutorial how to flash the Samsung Galaxy A71 helps please share it with your friends who are currently experiencing damage.

Please watch the video below:


Thank you

Bagikan Artikel ini