How to Flash LG-H810 / H811 with QFIL for 10 Minutes

In this tutorial the admin will share a tutorial on how to do flashing LG-H810 / H811 with the QFIL tool for system updates. This flashing is useful for LG-H810 / H811 Note who experience a total death or stuck in 9008 mode. Before flashing using QFIL, can it still enter recovery mode.


For Unbrick LG-H810 / H811 you can use QFIL, Miflash or other Qualcomm Tools in EDL 9008 Mode, to enter EDL mode please test points in the image below
How to Flash LG-H810 / H811 with QFIL for 10 Minutes
sumber : firmware27
If by doing a hard reset it does not solve the damage problem in LG-H810 / H811, please continue reading it. The flashing function is to solve software problems for LG-H810 / H811 such as:
  • Overcome smartphones that have forgotten patterns, forget pins and passwords
  • Repair a cellphone that vibrates continuously or restarts continuously
  • Overcome gadgets that experience root failure
  • Error while upgrading the system and downgrading the system in LG-H810 / H811
  • Repairing a cell that has a virus or malware
  • Resolve errors when root failure or total death (turn off) in LG-H810 / H811
  • Repair LG-H810 / H811 who experienced hardbrick or softbrick
How to flash LG-H810 / H811 with QFIL
Instructions to flash via QFIL Tool:
  • Download and install all the ingredients above
  • Open the QFIL tool and run it
  • Connect LG-H810 using a USB cable while pressing the volume up and down until it detects the USB Qualcomm HS-USB QDLoader (9008), sample image
How to Flash LG-H810 / H811 with QFIL for 10 Minutes
  • On the menu tab Select Build Type choose FLAT BUILD in the LG-H810 / H811 firmware
  • On the Select Programmer tab menu, click BROWSE, look for the LG-H810 / H811 file with the name prog_emmc_firehose.mbn, which was downloaded earlier.
How to Flash LG-H810 / H811 with QFIL for 10 Minutes
  • n the Select Build tab, click LOAD XML, look for the LG-H810 / H811 file with the name rawprogram0.xml and the patch0.xml file.

How to Flash LG-H810 / H811 with QFIL for 10 Minutes
  • After completion, click download
  • Wait for the flashing process to take place
  • When it's done it's marked with the appearance of DOWNLOAD SUCCES notifications
How to Flash LG-H810 / H811 with QFIL for 10 Minutes

  • Unplug the USB cable LG-H810 / H811 from the computer
  • Turn on LG-H810 / H811
  • Finnish
This is the way to improve LG-H810 / H811 which is damaged in the software section. If this method is not successful flash LG-H810 / H811, please look for another latest firmware or take it to the nearest service location.

Hopefully useful
Thank you

Belum ada Komentar untuk "How to Flash LG-H810 / H811 with QFIL for 10 Minutes"

Posting Komentar

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel