How to Flash Samsung Galaxy A50S

HOW TO FLASHING SAMSUNG GALAXY A50S - For this article the admin will provide a tutorial on how to overcome problems such as forgetting patterns, forgetting pins, forgetting passwords or other damage using the flashing method so that the SAMSUNG GALAXY A50S SM-A507FN can return to normal.

image source : spesifikasiharga.net

Before we go to the next section whether Samsung Galaxy A50S has done the factory reset method, the hard reset via recovery mode method proved to be safer and highly recommended, if you haven't tried it, please open the page below:

How to Factory Reset Samsung Galaxy A50S

If you have done the above method but have not resolved the problem please continue reading it. The SAMSUNG GALAXY A50S FLASH ODIN function is to correct problems such as:

Repair a smartphone that vibrates continuously or restarts continuously when it fails to flash
Overcome a cell that has root failure
Error while upgrading the system and system downgrade
Repairing the affected virus or malware
Resolve errors when root failure or total death (turn off)
Repair when experiencing hardbrick or softbrick

The Folowing Instructions:

Materials that must be prepared:

Tool OdinV3 - Link download
Driver Samsung - Link download
Firmware Samsung Galaxy A50S Indonesia - Link download

Flashing steps by steps:

Download the ingredients above
Extract everything that was downloaded
Install the Samsung USB driver on the computer
Turn on the Samsung Galaxy A50S while pressing POWER BUTTON + VOLUME DOWN

After entering recovery press VOLUME UP

make sure the smartphone and computer are connected using a data cable
Open and run odin3

Make sure the odin appears as above, it's a sign that the Samsung Galaxy A50S and the computer are connected
Enter the Samsung Galaxy A50S firmware and click as shown below: