How to New Flashing Meizu M3 Note
Rabu, 19 Juni 2019
Tambah Komentar
FLASH MEIZU M3 NOTE - For this article the admin will give a tutorial on how to reinstall MEIZU M3 NOTE that has problems such as forgetting patterns, forgetting pins, forgetting passwords or other damage using the flashing method so that the smartphone can return to normal.
If you have done the above method but have not resolved the problem please continue reading it. The flashtool function is to correct problems such as:
Terima kasih
image source : id.priceprice.com
Before we move on to the next section, is MEIZU M3 NOTE, you have already done the RESET FACTORY AND HARD RESET method, which has proven to be safer and highly recommended and also FLASHING VIA SD CARD.- Repair a smartphone that vibrates continuously or restarts continuously when it fails to flash
- Overcome a cell that has root failure
- Error while upgrading the system and system downgrade
- Repairing the affected virus or malware
- Resolve errors when root failure or total death (turn off)
- Repair when experiencing hardbrick or softbrick
Download the file below : |
- Driver Mediatek - Visit Site
- SP Flashtool - Visit Site
- Firmware MEIZU M3 NOTE - Visit Site
The Following Instruction : |
- Download, install and install all the ingredients above
- Run SP Flashtool using right-click RUN ADMINISTRATOR
- Open the download tab
- Click Scater loading, search for the MTxxxxT_Android_scatter.txt file in the firmware that was downloaded earlier
- First, select DOWNLOAD ONLY if you experience a failure then select FIRMWARE UPGRADE or FORMAT & DOWNLOAD
- Select the files that will be flashed "If you are not sure the firmware is preloader do not check"
- When finished, click download, then connect the smartphone to the PC using the data cable while pressing the volume up or volume down, but usually the volume up and wait for the flashing process to take place.
- The first flashing process will appear a RED bar to check the type of cellphone and firmware whether it is the same, then a GREEN bar appears to format the data on the cellphone and the YELLOW colored bar appears for the flashing process to begin.
- if Flashing is successful the checklist will appear
- Disconnect the data cable from the computer
- Turn on MEIZU M3 NOTE
Terima kasih
Belum ada Komentar untuk "How to New Flashing Meizu M3 Note"
Posting Komentar