How to Flash Realme C1 with QFIL
Rabu, 26 Juni 2019
Tambah Komentar
FLASH REALME C1 - In this tutorial the admin will share a tutorial on how to do flashing on a smartphone REALME C1 RMX1811EX uses the QFIL tool for system updates.
If by doing a hard reset it does not solve the damage problem in REALME C1, please continue reading it. The flashing function is to solve software problems such as:
Hopefully useful
Thank you
image source : sandroid.me
Before flashing using QFIL, has REALME C1 done a factory reset or hard reset via recovery mode, if not, please read the article below:Artikel Terkait : | |
- | How to reset Realme C1 |
- | How to flash Realme C1 From Sd card |
- | How dellete FRP bypass Realme C1 |
If by doing a hard reset it does not solve the damage problem in REALME C1, please continue reading it. The flashing function is to solve software problems such as:
- Overcome smartphones that have forgotten patterns, forget pins and passwords
- Repair a cellphone that vibrates continuously or restarts continuously
- Overcome gadgets that experience root failure
- Error while upgrading the system and downgrading the system in REALME C1
- Repairing a cell that has a virus or malware
- Resolve errors when root failure or total death (turn off)
- Repair REALME C1 who experienced hardbrick or softbrick
How to flash Realme C1 via QFIL |
- Driver Qualcomm - Link download
- Tool QFIL - Link download
- Unduh Firmware Realme C1 - Visit Site
- Download and install all the ingredients above
- Open the QFIL tool and run it
- Connect the smartphone using a USB cable while pressing the volume up and down until it detects the USB Qualcomm HS-USB QDLoader (9008), sample image

- On the menu tab Select Build Type choose FLAT BUILD in the REALME C1 firmware
- On the Select Programmer tab menu, click BROWSE, look for the REALME C1 file with the name prog_emmc_firehose.mbn, which was downloaded earlier.

- n the Select Build tab, click LOAD XML, look for the REALME C1 file with the name rawprogram0.xml and the patch0.xml file.

- After completion, click download
- Wait for the flashing process to take place
- When it's done it's marked with the appearance of DOWNLOAD SUCCES notifications

- Unplug the USB cable REALME C1 from the computer
- Turn on REALME C1
- Finnish
Hopefully useful
Thank you
Belum ada Komentar untuk "How to Flash Realme C1 with QFIL"
Posting Komentar