How to Flash Lenovo Z5 with QFIL for 10 Minutes

FLASH LENOVO Z5 - In this tutorial the admin will share a tutorial on how to do flashing on a smartphone LENOVO Z5 uses the QFIL tool for system updates.
How to Flash Lenovo Z5 with QFIL for 10 Minutes
image source : id.priceprice.com
Before flashing using QFIL, has LENOVO Z5 done a factory reset or hard reset via recovery mode, if not, please read the article below:
Artikel Terkait :
-How to reset Lenovo Z5
-How to flash Lenovo Z5 From Sd card
-How dellete FRP bypass Lenovo Z5

If by doing a hard reset it does not solve the damage problem in LENOVO Z5, please continue reading it. The flashing function is to solve software problems such as:
  • Overcome smartphones that have forgotten patterns, forget pins and passwords
  • Repair a cellphone that vibrates continuously or restarts continuously
  • Overcome gadgets that experience root failure
  • Error while upgrading the system and downgrading the system in LENOVO Z5
  • Repairing a cell that has a virus or malware
  • Resolve errors when root failure or total death (turn off)
  • Repair LENOVO Z5 who experienced hardbrick or softbrick
How to flash Lenovo Z5 via QFIL
Instructions to flash via QFIL Tool:
  • Download and install all the ingredients above
  • Open the QFIL tool and run it
  • Connect the smartphone using a USB cable while pressing the volume up and down until it detects the USB Qualcomm HS-USB QDLoader (9008), sample image
How to Flash Lenovo Z5 with QFIL for 10 Minutes
  • On the menu tab Select Build Type choose FLAT BUILD in the LENOVO Z5 firmware
  • On the Select Programmer tab menu, click BROWSE, look for the LENOVO Z5 file with the name prog_emmc_firehose.mbn, which was downloaded earlier.
How to Flash Lenovo Z5 with QFIL for 10 Minutes
  • n the Select Build tab, click LOAD XML, look for the LENOVO Z5 file with the name rawprogram0.xml and the patch0.xml file.
How to Flash Lenovo Z5 with QFIL for 10 Minutes
  • After completion, click download
  • Wait for the flashing process to take place
  • When it's done it's marked with the appearance of DOWNLOAD SUCCES notifications
How to Flash Lenovo Z5 with QFIL for 10 Minutes
  • Unplug the USB cable LENOVO Z5 from the computer
  • Turn on LENOVO Z5
  • Finnish
This is the way to improve LENOVO Z5 which is damaged in the software section. If this method is not successful, please look for another latest firmware or take it to the nearest service location.

Hopefully useful
Thank you

Belum ada Komentar untuk "How to Flash Lenovo Z5 with QFIL for 10 Minutes"

Posting Komentar

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2