How to Flash Asus Zenfone Live L2

FLASH ASUS ZENFONE LIVE L2 - For the previous article discussed how to hard reset at Asus  for this article the admin will discuss how to FLASH ASUS ZENFONE LIVE L2 by using a memory card through recovery mode without using a computer.
How to Flash Asus Zenfone Live L2
image source : unbox.ph
Flashing is useful for dealing with software damage problems including the following:
  • Overcome the Asus phone that has forgotten the pattern, forgot the pin and password
  • Repair gadgets that vibrate continuously or restart continuously
  • Overcome root failure
  • Error while upgrading the system and system downgrade
  • Repair a smartphone affected by a virus or malware
Before flashing the Asus Zenfone Live L2 using a memory card or OTA update you should first do a factory reset or a hard reset. This method is very safe and recommended. Please read the tutorial below :
For Android versions 8 and above, you cannot flash to a lower version (please check your mobile version at this time in Settings> System update). The flash process will delete data on Asus Zenfone Live L2 phones, such as contacts, messages. Please back up important data before doing so.

Make sure the Asus Zenfone Live L2 series is the same as WW-> WW, CN-> CN, TW-> TW, ID-> ID


How To Flash Asus Zenfone Live L2 Via Recovery Mode 
  • Preparation :
    • Memori card 8GB
    • Firmware OTA Asus Zenfone Live L2 - Visit site
  • Repair Asus :
    • Move the Asus firmware to the memory card, try not to store it in the folder
    • If the firmware extension is .rar, replace it with .zip
    • Pastikan baterai di atas 75%
    • Make sure the battery is above 75%
    • Turn it on by pressing POWER + VOLUME UP BUTTON
    • Release all buttons after the Asus logo appears
    • On the FASTBOOT start menu select RECOVERY MODE by using the power button as confirmation and volume as navigation

    • Asus Zenfone Live L2 will RESTART and re-enter the recovery menu with the supine green robot
    • To enter recovery mode press POWER + VOLUME UP BUTTON once to enter recovery mode
    • After entering recovery mode please select " APPLY UPDATE FROM SD CARD use the volume button as navigation and the power button to confirm
    • Look for the file that was transferred to the memory card, if you have found press OK using the power button
    • Wait for the flashing process to take place
    • After finishing REBOOT SYSTEM NOW

How to Flash Asus Zenfone Live L2 Via ADB 

  • Repair Asus :
    • Extract all the ingredients above and install them on the computer
    • Change the name of the Asus Zenfone Live L2 firmware that was downloaded earlier to user.zip (this change of name is only to facilitate the flashing process)
    • Move the firmware to the ADB Fastboot tool folder
    • Turn off Asus Zenfone
    • Turn it on by pressing POWER + VOLUME UP BUTTON
    • Release all buttons after the Asus logo appears
    • On the FASTBOOT start menu select RECOVERY MODE by using the power button as confirmation and volume as navigation
    • Asus Zenfone Live L2 will RESTART and re-enter the recovery menu with the supine green robot
    • To enter recovery mode press POWER + VOLUME UP BUTTON once to enter recovery mode
    • After entering Asus Zenfone recovery mode, please select ADB FROM UPDATE APPLY use the volume buttons as navigation and the power button to confirm
    • Connect Asus with a computer using a data cable
    • Enter the ADB folder fastboot tool
    • Run CMD that is in ADB FASTBOOT TOOL
    • After entering CMD on the computer, type the command ADB DEVICES , check whether the asus driver is connected
    • f you have typed the command ADB SIDELOAD USER.ZIP
    • Wait for the process to reach 100%
    • Asus Zenfone Live L2 will return to the recovery menu then select REBOOT SYSTEM NOW
    • Wait for the start up process to turn on again
May be useful
Thank You

Belum ada Komentar untuk "How to Flash Asus Zenfone Live L2"

Posting Komentar

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2